Tic T834 USB Multi-Interface Stepper Motor Controller

Pololu item #: 3133
Brand: Pololu
Status: Active and Preferred 
RoHS 3 compliant

Price break Unit price (US$)
1 39.95
5 36.75
25 33.81
100 31.11


backorders allowed

The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8834 driver, and male headers and terminal blocks are included but not soldered. It can operate from 2.5 V to 10.8 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2 A max with sufficient additional cooling).

Alternatives available with variations in these parameter(s): model connectors soldered? Select variant…

 Description Specs (15) Pictures (9) Resources (16) FAQs (1) On the blog (5) 

Dimensions

Size: 1.50″ × 1.05″ × 0.42″1
Weight: 5.0 g1

General specifications

Model: Tic T834
Motor driver: DRV8834
Control interface: USB; non-inverted TTL serial; I²C;
RC servo pulses; analog voltage; quadrature encoder
Minimum operating voltage: 2.5 V
Maximum operating voltage: 10.8 V
Continuous current per phase: 1.5 A2
Maximum current per phase: 2 A3
Maximum step rate: 50000 PPS
Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
Reverse voltage protection?: Y
Connectors soldered?: N

Identifying markings

PCB dev codes: tic02a
Other PCB markings: 0J10607

Notes:

1
Without included optional hardware.
2
Without a heat sink or forced air flow.
3
With sufficient additional cooling.

Related Products

Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Tic T500 USB Multi-Interface Stepper Motor Controller
Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Tic T825 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Tic T825 USB Multi-Interface Stepper Motor Controller
Tic T249 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Tic T249 USB Multi-Interface Stepper Motor Controller
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller (Connectors Soldered)
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller
Thin (2mm) USB Cable A to Micro-B, 6 ft, Low/Full-Speed Only
USB Cable A to Micro-B, 6 ft
MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control
MP6500 Stepper Motor Driver Carrier, Digital Current Control
DRV8834 Low-Voltage Stepper Motor Driver Carrier
DRV8825 Stepper Motor Driver Carrier, High Current
TB67S249FTG Stepper Motor Driver Compact Carrier
TB67S249FTG Stepper Motor Driver Carrier - Full Breakout
Pololu High-Power Stepper Motor Driver 36v4
Jrk G2 18v19 USB Motor Controller with Feedback
Jrk G2 24v21 USB Motor Controller with Feedback

Related Categories

Tic Stepper Motor Controllers
DRV8825 Stepper Motor Driver Carriers, High Current
Stepper Motor Drivers
Stepper Motors
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Solderless Breadboards
RC Interface
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors